Products- Sino-Galvo (Jiangsu) Technology Co., Ltd.
Welcome to Sino-Galvo (Jiangsu) Technology Co., Ltd.Official website!
AF7106 Auto-focusing Scanning System

The model AF7106 galvo scanner has the good running stability, high positioning accuracy, fast marking speed, strong anti-interference ability, the overall performance of AF7106 has reached the international leading level in this field.

The advantages are as following:


■ Adopted the photoelectric sensors which imported from America, and owned the proprietary intellectual property rights.

■ Differential photoelectric sensor for accurate detection of motor rotor position, good linearity, lower drift, high resolution and repeat positioning.

■ Accurate load design for 10 mm mirrors, high accuracy of motor assembly, reasonable structure, very small static friction coefficient and zero offset, all ensured the best dynamic characteristics for the whole system.

■ Design of overload, over-current and reverse connect protection, makes the system running more reliable.

■ This scanner system solved the common problems of motor temperature drift, signal interference and zero drift, etc.

■ Auto-focus mode, one key for positioning to the default focus height quickly, improving the operation efficiency.


AF7106 Motors & Drive Board Technical Parameters

Motor Specification

Working Temperature

0-45

Linearity

99.9%

Setting Time

0.35ms

Scale Drift

<40PPM/

Zero Drift

<15μRad./

Long-term Drift Over 8   Hours

<0.5mRad

RMS Current

2.0A

Peak Current

15A(Max)

Maximum Scan Angle

±15°

Storage Temperature

-10 to +60

Resolution

12μrad

Repeatability

8μrad

Input Aperture

10.0mm

Beam Displacement

13.4mm

Motor Weight

120g

Frequency

≤1000Hz

   Servo Driver Board Specification

Input Voltage

±15VDC

Interface Signal       Digital

XY2-100

Position Signal Input   Resistance

1KΩ±1%    

Position Signal Input   Scale Factor

0.33V/°

Position Signal Output   Scale Factor

0.33V/°

Working Temperature

0-45

Dimension(L×W×H)

75×50×28mm

Auto-focusing Control Parameter

Input Voltage

±15VDC

Distance measuring

Laser measure distance

Measure resolution rate

0.01mm

Measure accuracy

±0.1mm

Laser wavelength

620-690nm

Single measure time

0.25 second

Working temperature

0-45